Home > 3-Series 1999-2005 E46 > Engine Cooling Parts >

BMW E46 3-Series Expansion Tank Retainer By URO-Hudson 17111436251


BMW E46 3-Series Expansion Tank Retainer By URO-Hudson 17111436251




 
List Price: $65.43
Sale Price: $39.90
Part Condition: New
Manufacturer: Uro Parts

Stock Status:In Stock

Availability: Departs in 1 Business Day
Our Part Number: 17111436251A

Select Model


Select Transmission Type


Enter the last 7 of your VIN



Qty:  
Part Description Request Price Match Shipping & Warranty
 
Expansion tank retainer. Made By Uro-Vaico-Hudson. Select transmission type from menu.

Part # 17 11 1 436 250 (standard trans) or Part#17 11 1 436 251 (auto trans)

Average Rating: 3.5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
Leaky October 23, 2018
Reviewer: John Sakmar from Atlanta, GA United States  
Be cautious with this tank retainer.  I installed it on my 03 325i with the stock expansion tank (118k miles) and it leaked heavily from the expansion tank fitting where it did not before with the stock retainer.  Figured the expansion tank o ring needed replaced and bought a brand new OEM unit.  Installed it and was fine for a week or so but now is leaving small puddles every time I park the car.  Will be replacing the part with an OEM retainer.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works OK October 20, 2017
Reviewer: Igor from Oakland, CA United States  
Definitely not as well made as the OEM version, but it fit perfectly and so is working fine so far.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
BMW E46 3-Series Expansion Tank Retainer May 9, 2017
Reviewer: John Moroles from Bonney Lake, WA United States  
After hours of remove and replace I was excited to get 50/50 antifreeze in tank again only to find that I had a leak. After going round and round trying to figure out where I had a leak it turned out quality control failed. The plug came from the factory (only part made in China too in my order) without a seal. I could tighten it but it would never seal. Hope to get my money back on that one. They're great customer support. I expect nothing less. Since it's designed to not come out I had to force it out to seal it. There may be a small piece of plastic floating somewhere in my cooling system. Ouch!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good Part......... August 8, 2015
Reviewer: William H. Caple III from Chandler, AZ United States  
Everything seems to be of great construction.  The fit was good too.  The only thing I didn't hear the typical click when seating the Expansion Tank to the Retainer.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Wasn't sure I needed - glad I bought it for sanity March 10, 2015
Reviewer: Trevor Vander from Melbourne, FL United States  
Old one was brittle, could have retained it but this was cheap insurance since i was replacing every other component.

Was this review helpful to you?