Home > 3-Series 1999-2005 E46 > Brake Parts >

BMW E46 3-Series High Performance Front Brake Rotor By Meyle UV

BMW E46 3-Series High Performance Front Brake Rotor By Meyle UV

List Price: $99.11
Sale Price: $52.40
Part Condition: New
Manufacturer: Meyle High Carbon UV

Stock Status:In Stock

Availability: Departs in 1 Business Day
Our Part Number: 34116864058-047UV

Select Model

Select Part Location

Enter the last 7 of your VIN

Part Description Request Price Match Shipping & Warranty
Front brake rotor with corrosion coating and High Cabon Content.Made By Meyle UV.Sold each.

Part# 34 11 6 864 058 or Part# 34 11 6 864 047 Depending on model selected.
Cross References:
Why Use High Carbon Brake Discs?
While the original MEYLE Platinum rotors are made to meet the German/European G3000 standards, the
MEYLE UV HC rotors go above and beyond meeting the GG15HC high carbon content standard, which
adds stability in high heat producing circumstances, very aggressive driving, and heavier vehicles.
There are two main reasons to use higher carbon content rotors:
1. The higher carbon content stands out with its
thermal stability and damping behavior.
2. The higher carbon content rotors are less prone
to warping due to improved heat dissipation
and an increase in torsional stiffness. e.g. on heavy platforms.

Increased braking safety, maximum comfort
• No warping
• Non-solvent UV coating technology
• Ready-to-fit – no degreasing
• Reduced corrosion thanks to precision coating of visible surface areas
• Long-lasting brilliant appearance as thicker layers of lacquer coating are
applied to visible areas keeping them permanently shiny and rust-free
• Environmentally friendly and energy saving production

The new MEYLE UV Coated High Carbon Disc – Brilliant in appearance, engineered to last
Made of high carbon steel, the all new MEYLE UV Coated, High Carbon (HC), brake discs
are built to last, with enhanced durability, improved damping behavior, and thermal stability.
As a result, noise and vibrations are reduced in everyday traffic, as well as under more
extreme driving conditions.
Thanks to a new UV coating process, the lacquer thickness of each MEYLE UV HC brake
disc surface is enhanced, reinforcing anti-corrosion protection in the most vulnerable areas.
The effort pays off impressively, by combining all the benefits of the tried-and-tested zinc flake
coating with a brilliant look that simply lasts longer. Even after a long period of use, the brake discs will perform reliably, while maintaining their shine.

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
Meyle UV June 3, 2017
Reviewer: marcos a from middletown, OH United States  
No complaints about this product. Keep in mind I have only had them on my car for a couple of weeks. They only cost a few dollars more than some other rotors, so if the UV coating lasts and they continue to perform as they do now then I have no complaints. These rotors are on a car I drive to work so I can't attest to any high performance characteristics. However for my application, they work just fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
No warp noticed yet.... May 2, 2016
Reviewer: Ryan D. from Darien, IL United States  
I installed these about 3 weeks ago and haven't noticed any movement. Much better than the comparable non-high carbon version.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great product April 30, 2016
Reviewer: brian luan from duarte, CA United States  
Installed components to car and vehicle drives better then oem brakes. Highly recommend these brake rotors

Was this review helpful to you?